The version of xntp3 that shipped with Slackware 7.1 as well as the
version that was in Slackware -current contains a buffer overflow bug that
could lead to a root compromise.  Slackware 7.1 and Slackware -current
users are urged to upgrade to the new packages available for their
release.

The updated package available for Slackware 7.1 is a patched version of
xntp3.  The -current tree has been upgraded to ntp4, which also fixes the
problem.  If you want to continue using xntp3 on -current, you can use the
updated package from the Slackware 7.1 tree and it will work.

The updates available are:


FOR SLACKWARE 7.1:

 ================================
 xntp3-5.93e AVAILABLE (xntp.tgz)
 ================================

  Patched xntp3-5.93e against recently reported buffer overflow problem.
  All sites running xntp from Slackware 7.1 should either upgrade to this
  package or ensure that their /etc/ntp.conf does not allow connections
  from untrusted hosts.  To deny people access to your time daemon (not a
  bad idea anyway if you're only running ntp to keep your own clock
  updated) use this in /etc/ntp.conf:

     #  Don't serve time or stats to anyone else
     restrict default ignore

  The buffer overflow problem can be fixed by upgrading to this package:
  ---------------------------------------------------------------------

     ftp://ftp.slackware.com/pub/slackware/slackware-7.1/patches/packages/xntp.tgz

  For verification purposes, we provide the following checksums:
  -------------------------------------------------------------

     16-bit "sum" checksum:
     39955   509   xntp.tgz

     128-bit MD5 message digest:
     aefbeb1a1c8d2af8e1d1906f823368bd  xntp.tgz

  Installation instructions for the xntp.tgz package:
  --------------------------------------------------

     Make sure you are not running xntpd on your system.  This command
     should stop the daemon:

        killall xntpd

     Check to make sure it's not running:

        ps -ef | grep xntpd

     Once you have stopped the daemon, upgrade the package using
     upgradepkg:

        upgradepkg xntp.tgz

     Then you can restart the daemon:

        /usr/sbin/xntpd


FOR SLACKWARE -CURRENT:

 ==================================
 ntp-4.0.99k23 AVAILABLE (ntp4.tgz)
 ==================================

  This package replaces the xntp.tgz package (which contained xntp3-5.93e).
  The older version (and all versions prior to ntp-4.0.99k23, which was
  released yesterday) contain a buffer overflow bug which could lead to a
  root compromise on sites offering ntp service.

  The buffer overflow can be fixed by upgrading to the new ntp4.tgz package:
  -------------------------------------------------------------------------

     ftp://ftp.slackware.com/pub/slackware/slackware-current/slakware/n1/ntp4.tgz

  For verification purposes, we provide the following checksums:
  -------------------------------------------------------------

     16-bit "sum" checksum:
     12988  1167  ntp4.tgz

     128-bit MD5 message digest:
     8dc3ec08fc63500ff75f640a1894bdd0  ntp4.tgz

  Installation instructions for the ntp4.tgz package:
  --------------------------------------------------

     Make sure you are not running xntpd on your system.  This command
     should stop the daemon:

        killall xntpd

     Check to make sure it's not running:

        ps -ef | grep xntpd

     Once you have stopped the daemon, upgrade the package using
     upgradepkg:

        upgradepkg xntp%ntp4

     Then you can restart the daemon:

        /usr/sbin/ntpd


Remember, it's also a good idea to backup configuration files before
upgrading packages.

- Slackware Linux Security Team
  http://www.slackware.com


+------------------------------------------------------------------------+
| HOW TO REMOVE YOURSELF FROM THIS MAILING LIST:                         |
+------------------------------------------------------------------------+
| Send an email to majordomo@slackware.com with this text in the body of |
| the email message:                                                     |
|                                                                        |
|   unsubscribe slackware-security                                       |
|                                                                        |
| You will get a confirmation message back.  Follow the instructions to  |
| complete the unsubscription.  Do not reply to this message to          |
| unsubscribe!                                                           |
+------------------------------------------------------------------------+