-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

[slackware-security]  Slackware 14.2 kernel (SSA:2018-240-01)

New kernel packages are available for Slackware 14.2 to mitigate
security issues.


Here are the details from the Slackware 14.2 ChangeLog:
+--------------------------+
patches/packages/linux-4.4.153/*:  Upgraded.
  This kernel update enables mitigations for L1 Terminal Fault aka
  Foreshadow and Foreshadow-NG vulnerabilities.
  Thanks to Bernhard Kaindl for bisecting the boot issue that was preventing
  us from upgrading to earlier 4.4.x kernels that contained this fix.
  To see the status of CPU vulnerability mitigations on your system, look at
  the files in: /sys/devices/system/cpu/vulnerabilities
  Be sure to upgrade your initrd after upgrading the kernel packages.
  If you use lilo to boot your machine, be sure lilo.conf points to the correct
  kernel and initrd and run lilo as root to update the bootloader.
  If you use elilo to boot your machine, you should run eliloconfig to copy the
  kernel and initrd to the EFI System Partition.
  For more information, see:
    https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2018-3615
    https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2018-3620
    https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2018-3546
  (* Security fix *)
+--------------------------+


Where to find the new packages:
+-----------------------------+

Thanks to the friendly folks at the OSU Open Source Lab
(http://osuosl.org) for donating FTP and rsync hosting
to the Slackware project!  :-)

Also see the "Get Slack" section on http://slackware.com for
additional mirror sites near you.

Updated packages for Slackware 14.2:
ftp://ftp.slackware.com/pub/slackware/slackware-14.2/patches/packages/linux-4.4.153/kernel-firmware-20180825_fea76a0-noarch-1.txz
ftp://ftp.slackware.com/pub/slackware/slackware-14.2/patches/packages/linux-4.4.153/kernel-generic-4.4.153-i586-1.txz
ftp://ftp.slackware.com/pub/slackware/slackware-14.2/patches/packages/linux-4.4.153/kernel-generic-smp-4.4.153_smp-i686-1.txz
ftp://ftp.slackware.com/pub/slackware/slackware-14.2/patches/packages/linux-4.4.153/kernel-headers-4.4.153_smp-x86-1.txz
ftp://ftp.slackware.com/pub/slackware/slackware-14.2/patches/packages/linux-4.4.153/kernel-huge-4.4.153-i586-1.txz
ftp://ftp.slackware.com/pub/slackware/slackware-14.2/patches/packages/linux-4.4.153/kernel-huge-smp-4.4.153_smp-i686-1.txz
ftp://ftp.slackware.com/pub/slackware/slackware-14.2/patches/packages/linux-4.4.153/kernel-modules-4.4.153-i586-1.txz
ftp://ftp.slackware.com/pub/slackware/slackware-14.2/patches/packages/linux-4.4.153/kernel-modules-smp-4.4.153_smp-i686-1.txz
ftp://ftp.slackware.com/pub/slackware/slackware-14.2/patches/packages/linux-4.4.153/kernel-source-4.4.153_smp-noarch-1.txz

Updated packages for Slackware x86_64 14.2:
ftp://ftp.slackware.com/pub/slackware/slackware64-14.2/patches/packages/linux-4.4.153/kernel-firmware-20180825_fea76a0-noarch-1.txz
ftp://ftp.slackware.com/pub/slackware/slackware64-14.2/patches/packages/linux-4.4.153/kernel-generic-4.4.153-x86_64-1.txz
ftp://ftp.slackware.com/pub/slackware/slackware64-14.2/patches/packages/linux-4.4.153/kernel-headers-4.4.153-x86-1.txz
ftp://ftp.slackware.com/pub/slackware/slackware64-14.2/patches/packages/linux-4.4.153/kernel-huge-4.4.153-x86_64-1.txz
ftp://ftp.slackware.com/pub/slackware/slackware64-14.2/patches/packages/linux-4.4.153/kernel-modules-4.4.153-x86_64-1.txz
ftp://ftp.slackware.com/pub/slackware/slackware64-14.2/patches/packages/linux-4.4.153/kernel-source-4.4.153-noarch-1.txz


MD5 signatures:
+-------------+

Slackware 14.2 packages:
b0a4ac8050eed122d407069db8704be2  kernel-firmware-20180825_fea76a0-noarch-1.txz
cd110706f35e4496017f7270d393fcf9  kernel-generic-4.4.153-i586-1.txz
57b026fb409d15596b91963bfab973b5  kernel-generic-smp-4.4.153_smp-i686-1.txz
d1f1a717bcdc85be8382628f0a38ae78  kernel-headers-4.4.153_smp-x86-1.txz
439fc6640ce50c1b061b60b6a7afffe9  kernel-huge-4.4.153-i586-1.txz
b1683dd7d0a3f6898f5d8ffecca50c4a  kernel-huge-smp-4.4.153_smp-i686-1.txz
5ac4445b7ac81c65e4fe8269fa8f7b23  kernel-modules-4.4.153-i586-1.txz
3f9a394283e7feff520b6bff6219d1de  kernel-modules-smp-4.4.153_smp-i686-1.txz
4b8979e2226d66d957b33deacbf5fb26  kernel-source-4.4.153_smp-noarch-1.txz

Slackware x86_64 14.2 packages:
b0a4ac8050eed122d407069db8704be2  kernel-firmware-20180825_fea76a0-noarch-1.txz
1109c106490e646cf687fbd1ac7211cd  kernel-generic-4.4.153-x86_64-1.txz
8668e44ceb919d862e02c7eedfd2cf1d  kernel-headers-4.4.153-x86-1.txz
fe42dde9fd78ef32c4527e0a6fa60da0  kernel-huge-4.4.153-x86_64-1.txz
7a872f2bff05ebad6ec781f36bf0e392  kernel-modules-4.4.153-x86_64-1.txz
6403fd73910a3f1e1b9eed3ecb6de0e4  kernel-source-4.4.153-noarch-1.txz


Installation instructions:
+------------------------+

Upgrade the packages as root:
# upgradepkg kernel-*.txz

If you are using an initrd, you'll need to rebuild it.

For a 32-bit SMP machine, use this command (substitute the appropriate
kernel version if you are not running Slackware 14.2):
# /usr/share/mkinitrd/mkinitrd_command_generator.sh -k 4.4.153-smp | bash

For a 64-bit machine, or a 32-bit uniprocessor machine, use this command
(substitute the appropriate kernel version if you are not running
Slackware 14.2):
# /usr/share/mkinitrd/mkinitrd_command_generator.sh -k 4.4.153 | bash

Please note that "uniprocessor" has to do with the kernel you are running,
not with the CPU.  Most systems should run the SMP kernel (if they can)
regardless of the number of cores the CPU has.  If you aren't sure which
kernel you are running, run "uname -a".  If you see SMP there, you are
running the SMP kernel and should use the 4.4.153-smp version when running
mkinitrd_command_generator.  Note that this is only for 32-bit -- 64-bit
systems should always use 4.4.153 as the version.

If you are using lilo or elilo to boot the machine, you'll need to ensure
that the machine is properly prepared before rebooting.

If using LILO:
By default, lilo.conf contains an image= line that references a symlink
that always points to the correct kernel.  No editing should be required
unless your machine uses a custom lilo.conf.  If that is the case, be sure
that the image= line references the correct kernel file.  Either way,
you'll need to run "lilo" as root to reinstall the boot loader.

If using elilo:
Ensure that the /boot/vmlinuz symlink is pointing to the kernel you wish
to use, and then run eliloconfig to update the EFI System Partition.


+-----+

Slackware Linux Security Team
http://slackware.com/gpg-key
security@slackware.com

+------------------------------------------------------------------------+
| To leave the slackware-security mailing list:                          |
+------------------------------------------------------------------------+
| Send an email to majordomo@slackware.com with this text in the body of |
| the email message:                                                     |
|                                                                        |
|   unsubscribe slackware-security                                       |
|                                                                        |
| You will get a confirmation message back containing instructions to    |
| complete the process.  Please do not reply to this email address.      |
+------------------------------------------------------------------------+
-----BEGIN PGP SIGNATURE-----

iEYEARECAAYFAluFyGYACgkQakRjwEAQIjN99wCbBHlVovtqYBjkObo2PP9WIIr7
eI8An0+88QDu5DNT6mF1CrHvAToR3o8G
=SVgT
-----END PGP SIGNATURE-----